ProForm 505 Cst Treadmill User Manual

Serial NumberDecalModel No. PFTL60910.0Serial No.Write the serial number in the spaceabove for reference.CAUTIONRead all precautions and instruc-tions

1010. IMPORTANT: To avoid damaging theCrossbar (107), do not use power tools anddo not overtighten the #10 x 3/4" Screws (2).Orient the Crossbar

1112. Set the console assembly on the Left and RightHandrails (82, 83). Be careful not to pinch anywires. Insert the excess Upright Wire (87) intothe

1213. Hold the Right Upright Cover (86) against theconsole assembly. Align the holes in the RightUpright Cover with the holes in the Right Upright(85)

13OPERATION AND ADJUSTMENTTHE PRE-LUBRICATED WALKING BELTYour treadmill features a walking belt coated with high-performance lubricant. IMPORTANT: Nev

14FEATURES OF THE CONSOLEThe treadmill console offers an impressive array offeatures designed to make your workouts more effec-tive and enjoyable. Whe

15HOW TO TURN ON THE POWERIMPORTANT: If the treadmill has been exposed tocold temperatures, allow it to warm to room tem-perature before turning on th

16• The incline level of the treadmill• The number of vertical feet you have climbed• The speed of the walking belt• Your heart rate (see step 6 on th

17HOW TO USE AN ONBOARD WORKOUT1. Insert the key into the console.See HOW TO TURN ON THE POWER on page 15.2. Select an onboard workout.To select an on

18If the speed or incline setting is too high or too lowat any time during the workout, you can manuallyoverride the setting by pressing the Speed orI

19When you select an iFit Live workout, the displaywill show the duration of the workout, the distanceyou will walk or run, and the approximate number

TABLE OF CONTENTSWARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

20THE INFORMATION MODEThe console features an information mode that keepstrack of treadmill information and allows you to person-alize console setting

21HOW TO FOLD THE TREADMILLTo avoid damaging the treadmill, adjust the inclineto the lowest position before you fold the treadmill.Then, remove the ke

22TROUBLESHOOTINGMost treadmill problems can be solved by following the simple steps below. Find the symptom thatapplies, and follow the steps listed.

23Remove the three #8 x 3/4" Screws (1) and care-fully pivot the Motor Hood (62) off.Locate the Reed Switch (73) and the Magnet (47)on the left s

24PROBLEM: The walking belt is off-center or slips when walked onSOLUTION: a. If the walking belt is off-center, first remove thekey and UNPLUG THE PO

25These guidelines will help you to plan your exerciseprogram. For detailed exercise information, obtain areputable book or consult your physician. Re

26PART LIST—Model No. PFTL60910.0 R0910ATo locate the parts listed below, see the EXPLODED DRAWING near the end of this manual.Key No. Qty. Descriptio

27Key No. Qty. Description Key No. Qty. Description101 1 Console102 1 Console Frame103 1 Tray104 1 5/32" Hex Key105 2 Console Clamp106 1 Console

8651202121343334332832324343304530303039403636364745463644414948543960555656465859615718102423181919202430303030284218421810428EXPLODED DRAWING A—Mode

15151515741873373737111172222282869707168626476757265162828316766777978161663EXPLODED DRAWING B—Model No. PFTL60910.0 R0910A29

31. Before beginning any exercise program, con-sult your physician. This is especially impor-tant for persons over age 35 or persons withpre-existing

9059059059696827358989859592929490594252635359798871010893878683828181803838113344131327358471171114111188911491291230EXPLODED DRAWING C—Model No. PFT

995311081031011210712522910210611111122111111110011051055053111110931EXPLODED DRAWING D—Model No. PFTL60910.0 R0910A

Part No. 301412 R0910A Printed in USA © 2010 ICON IP, Inc.ORDERING REPLACEMENT PARTSTo order replacement parts, please see the front cover of this man

420. Never leave the treadmill unattended while itis running. Always remove the key, unplugthe power cord, and press the power switchinto the off posi

5Thank you for selecting the revolutionary PROFORM®505 CST treadmill. The 505 CST treadmill offers animpressive selection of features designed to make

6ASSEMBLYTo hire an authorized service technician to assemble the treadmill, call 1-800-445-2480.Assembly requires two persons. Set the treadmill in a

72. Attach a Wheel (96) to the Base (95) with a 3/8"x 2" Bolt (8) and a 3/8" Nut (10). Do not over-tighten the Nut; the Wheel must turn

84. Hold the Right Upright (85) against the Base(95). Be careful not to pinch the UprightWire (87). Insert two 3/8" x 4" Bolts (7) with two3

6. Hold the Left Upright (84) against the Base (95).Insert two 3/8" x 4" Bolts (7) with two 3/8" StarWashers (11) and a 3/8" x 1 1