ProForm 1280 Premier Es Treadmill User Manual download pdf (Page 10)

1. Make sure that the power cord is unplugged.

Remove the indicated #8 x 3/4" Screws (4) from

the Pulse Receiver Cover (70) on the back of the

console assembly.

2. Next, hold the receiver so the antenna is ori-

ented as shown. Attach the receiver to the

Pulse Receiver Cover (70) with the two included

small screws.

3. Connect the wire on the receiver to the wire ex-

tending from the console assembly. Make sure

that no wires are pinched. Slide the tab on the

Pulse Receiver Cover (70) into the indicated hole

in the console assembly. Reattach the Pulse

Receiver Cover to the console assembly with the

two #8 x 3/4" Screws (4). Discard the other wires

included with the receiver.

If you purchase the optional chest pulse sensor (see page 19), follow the steps below to install the re-

ceiver included with the chest pulse sensor.

Console

Assembly

Wires

Tab

Antenna

Small Screws

Console

Assembly

Hole

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 31 32

No comments

ProForm 1280 Premier Es Treadmill User Manual Page 10