ProForm 600E User Manual Page 23

  • Download
  • Add to my manuals
  • Print
  • Page
    / 36
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 22
23
THE INFORMATION MODE
The console features an information mode that keeps
t
rack of the total distance that the walking belt has
moved and the total number of hours that the treadmill
h
as been used. The information mode also allows you
to select miles or kilometers to measure distance, and
to turn on and turn off the display demo mode.
To select the information mode, hold down the Stop
button while inserting the key into the console and then
release the Stop button. When the information mode is
selected, the following information will be shown:
The left display will show
the total number of hours
the treadmill has been
used.
The right display will show
the total number of miles or
kilometers that the walking
belt has moved.
Press the Stop button again to view the following infor-
mation:
The console features a
display demo mode, de-
signed to be used if the
treadmill is displayed in a
store. While the demo
mode is turned on, the
console will function normally when you plug in the
power cord, press the power switch into the reset posi-
tion, and insert the key into the console. However,
when you remove the key, the displays will remain lit,
although the buttons will not function. If the demo
mode is turned on, a “d” will appear in the left display
while the information mode is selected. To turn on or
turn off the demo mode, press the Speed decrease
button.
An “E” for English miles or
an “M” for metric kilometers
will appear in the right dis-
p
lay. Press the Speed in-
crease button to change the
u
nit of measurement if de-
sired.
To exit the information mode, remove the key from the
console.
HOW TO USE THE STEREO SOUND SYSTEM
To play music or audio books through the consoleʼs
stereo speakers, you must connect your MP3 player,
CD player, or other personal audio player to the con-
sole through the audio jack.
To use the audio jack, locate the audio wire and plug it
into the audio jack on the side of the console. Then
plug the audio wire into a jack on your MP3 player, CD
player, or other personal audio player. Make sure that
the audio wire is fully plugged in.
Next, press the Play button
on your MP3 player, CD
player, or other personal
audio player. Adjust the vol-
ume on your personal audio
player or press the Volume
increase and decrease but-
tons on the console.
If you are using a personal CD player and the CD
skips, set the CD player on the floor or another flat sur-
face and not on the console.
Volume Decrease
Volume Increase
Page view 22
1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 35 36

Comments to this Manuals

No comments