ProForm C970 User Manual Page 6

  • Download
  • Add to my manuals
  • Print
  • Page
    / 34
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 5
ASSEMBLY
Assembly requires two persons. Place the treadmill in a cleared area and remove all packing materials. Do not
dispose of the packing materials until the treadmill is assembled.
Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a
small amount of lubricant may be transferred to the top of the walking belt, the sides of the walking platform, or
the shipping carton. This does not affect treadmill performance. If there is lubricant on top of the walking belt or
on the sides of the walking platform, wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.
Assembly requires your own phillips screwdriver , rubber mallet , wire
cutters , and adjustable wrench .
1. For help identifying small parts, see the PART IDEN-
TIFICATION CHART on page 31.
Cut the plastic ties (not shown) from the sides of the
treadmill. With the help of a second person, carefully
raise the Uprights (65) until the Wheels (not shown) are
resting on the floor.
Hold the Book Plate (114) against the back of the
Console Base (117) and the Upright (65) as shown.
Attach the Book Plate with four 3/4” Screws (101).
2. Insert one of the Handrail Extensions (76) into the square
post on the left Upright (65). Make sure that the notch
in the Handrail Extension is in the position shown.
Align the small holes in the Handrail Extension with the
holes in the post. If necessary, use a rubber mallet to fully
insert the Handrail Extension. Attach the Handrail
Extension with four Screws (40).
Identify the Left Foam Grip (62), which has a hole in the
right side. Slide the Left Foam Grip as far as possible
onto the Handrail Extension (76) and the post. The hole
in the Left Foam Grip should align with the notch in the
Handrail Extension (Note: It may be helpful to squeeze
the top and bottom of the Left Foam Grip or apply soapy
water to the Handrail Extension.) Press two Plastic
Fasteners (75) into the bottom of the Left Foam Grip and
the Handrail Extension. Note: It may be helpful to tap on
the Plastic Fasteners with a rubber mallet.
Attach the other Handrail Extension (not shown) and the
Right Foam Grip (not shown) to the post on the right
Upright (65) in the same way. Note: There is not a hole in
the side of the Right Foam Grip.
Identify the Left Cup Holder (128); the lower edge of the
Left Cup Holder is slightly narrower on the left side. Insert
the Left Cup Holder and the Right Cup Holder (not shown)
into the Book Plate (114).
6
114
65
117
1
Hole
40
Post
65
128
114
76
62
75
2
Notch
40
101
101
Page view 5
1 2 3 4 5 6 7 8 9 10 11 ... 33 34

Comments to this Manuals

No comments