ProForm 710 Zlt Treadmill User Manual Page 1

USER’S MANUALModel No. PETL81711.0 Serial No. Write the serial number in the space above for reference.QUESTIONS?

1069Console Assembly9761075WiresConsole AssemblyWireTie7087075Console Wire8. Locate the tie in the console assembly. Use the tie to pull the ground

1110. Attach the Pulse Bar Bottom (90) to the console assembly with six #8 x 3/4" Screws (6); start all six Screws, and then tighten them. Do n

1214. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic on the treadmill decals, remove

13HOW TO PLUG IN THE POWER CORD This product must be earthed. If it should malfunc-tion or break down, earthing provides a path of least resistance fo

14ETHR61510(HRTL61510)FEATURES OF THE CONSOLE The treadmill console offers an impressive array of features designed to make your workouts more effec-t

15HOW TO TURN ON THE POWERIMPORTANT: If the treadmill has been exposed to cold temperatures, allow it to warm to room tem-perature before turning on t

164. Change the incline of the treadmill as desired. To change the incline of the treadmill, press the Incline increase or decrease button or one

176. Measure your heart rate if desired. Note: If you use the handgrip heart rate moni-tor and the optional chest heart rate monitor at the same ti

18HOW TO USE AN ONBOARD WORKOUT1. Insert the key into the console. See HOW TO TURN ON THE POWER on page 15. 2. Select an onboard workout. To

19HOW TO USE AN IFIT LIVE WORKOUTNote: To use an iFit Live workout, you must have an optional iFit Live module. To purchase an iFit Live module at any

2WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

20 6. Follow your progress with the displays. See step 5 on page 16. The My Trail tab will show a map of the trail you are walking or running o

21THE INFORMATION MODEThe console features an information mode that keeps track of treadmill information and allows you to person-alize console settin

22 HOW TO FOLD THE TREADMILLTo avoid damaging the treadmill, adjust the incline to the lowest position before you fold the treadmill. Then, remove the

23Most treadmill problems can be solved by follow-ing the simple steps below. Find the symptom that applies, and follow the steps listed. If further a

24 Lower the treadmill (see HOW TO LOWER THE TREADMILL FOR USE on page 22). Remove the three #8 x 3/4" Screws (6). Carefully slide the Motor Ho

25SYMPTOM: The walking belt is off-center or slips when walked ona. If the walking belt is off-center, first remove the key and UNPLUG THE POWER COR

26EXERCISE GUIDELINESThese guidelines will help you to plan your exercise program. For detailed exercise information, obtain a reputable book or consu

27SUGGESTED STRETCHESThe correct form for several basic stretches is shown at the right. Move slowly as you stretch —never bounce.1. Toe Touch Stretch

28NOTES

29NOTES

31. Before beginning any exercise program, consult your physician. This is especially important for persons over age 35 or persons with pre-existing

30 Key No. Qty. Description Key No. Qty. Description 1 11 #8 x 1/2" Ground Screw 2 2 3/8" x 2 1/2" Bolt 3 6 3/8" N

31 Key No. Qty. Description Key No. Qty. Description 101 1 Receptical 102 1 UK Power Cord 103 1 Filter Bracket 104 1 Filter 105 1

325127252424414142383950491434373230272347294228292833191952195366661426553542540434436124648486716104194519191919261919191913116163556949494943633191

33616667656163621585958182021602265766433171720216181866666686619919910010266101EXPLODED DRAWING BModel No. PETL81711.0 R1111A

3480781555XX77154478447677281319328119796770101110119111197172747378675611919556969747378797979929393777766EXPLODED DRAWING CModel No. PETL81711.0 R11

35951294331141129131858283313184686888889879066666666666616666EXPLODED DRAWING DModel No. PETL81711.0 R1111A

Part No. 324025 R1111A Printed in China © 2011 ICON IP, Inc.ORDERING REPLACEMENT PARTSTo order replacement parts, please see the front cover of this

419. Never leave the treadmill unattended while it is running. Always remove the key, unplug the power cord, and press the power switch into the off p

5Thank you for selecting the revolutionary PROFORM® 710 ZLT treadmill. The 710 ZLT treadmill offers an impressive selection of features designed to m

6Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until as

73. Identify the Left Upright (75), which is either marked “Left” or “L.” Have a second person hold the Left Upright near the Base (80). See the

85. Set the Console Base (83) face down on a soft surface to avoid scratching the Console Base. Remove the two Screws (A) from the Console Frame

97. Insert the upper end of the Left Handrail (71) into the tube on the Console Frame (87). Hold the lower end against the Left Upright (75). Att