ProForm 710 Zlt Treadmill User Manual download pdf (Page 6)

Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not

dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking

belt is coated with high-performance lubricant. During shipping, some lubricant may be transferred to the top of

the walking belt or the shipping carton. This is normal and does not affect treadmill performance. If there is lubri-

cant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.

Assembly requires the included hex key and your own Phillips screwdriver , adjustable

wrench , scissors , and needlenose pliers .

Use the drawings below to identify the assembly hardware. The number in parentheses below each drawing is the

key number of the part, from the PART LIST near the end of this manual. The number after the parentheses is the

quantity needed for assembly. Note: Some small parts may have been preassembled. To avoid damaging

parts, do not use power tools. Extra hardware may be included.

#8 x 1/2" Ground

Screw (1)–1

3/8" Star

Washer (5)–6

3/8" Nut (3)–4

#8 x 3/4" Screw

(6)–18

5/16" Star

Washer (8)–2

1/4" x 5/8"

Screw (9)–4

1/4" Star

Washer (11)–4

3/8" x 2" Bolt (13)–1

3/8" x 2 1/2" Bolt (2)–2

3/8" x 4" Screw (4)–6

3/8" x 1 3/4" Bolt (12)–1

1/4" x 1 3/4"

Screw (10)–4

5/16" x 3 1/4" Screw (7)–2

3/8" x 1 3/4" Patch Bolt (12)–1

1/4" x 1 3/4"

Patch Bolt (10)–4

5/16" x 3 1/4"

Patch Bolt (7)–2

3/8" x 3 1/2" Screw (4)–6

ASSEMBLY

1 2 3 4 5 6 7 8 9 10 11 ... 35 36

No comments

ProForm 710 Zlt Treadmill User Manual Page 6