ProForm TREADMILL PFTL81405.0 User Manual

USER’S MANUAL Model No. PETL10714.0Serial No. Write the serial number in the space above for reference. CAUTIO

106 . Set a Handrail (84) onto the Right Upright (90). Make sure that the Upright Wire (81) is not pinched. Attach the Handrail (84) with two 5/16

118. With the help of a second person, hold the con-sole assembly near the right Handrail (84) and the left Handrail (not shown). See the inset d

1210. IMPORTANT: To avoid damaging the Pulse Crossbar (5), do not use power tools and do not overtighten the #10 x 3/4" Screws (9). Tighten fo

131312. Identify the Left and Right Handrail Covers (87, 8). Slide the Left Handrail Cover (87) up against the console assembly and tighten a #8 x 3

1414. Orient the Storage Latch (96) so that the decals are facing away from the treadmill as shown. Attach the lower end of the Storage Latch (96) t

1517. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic on the treadmill decals, remove

16HOW TO PUT ON THE HEART RATE MONITORThe heart rate monitor consists of a chest strap and a sensor. Insert the tab on one end of the chest strap in

17HOW TO PLUG IN THE POWER CORDThis product must be earthed. If it should malfunc-tion or break down, earthing provides a path of least resistance for

18ETPE10714(PETL10714)FEATURES OF THE CONSOLE The treadmill console offers an impressive array of features designed to make your workouts more effec-t

19HOW TO TURN ON THE POWERIMPORTANT: If the treadmill has been exposed to cold temperatures, allow it to warm to room tem-perature before you turn on

2WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

20 5. Follow your progress with the displays. The matrix—When you select the manual mode, the matrix will display a track that represents 400 m

21HOW TO USE AN ONBOARD WORKOUT1. Insert the key into the console. See HOW TO TURN ON THE POWER on page 19. 2. Select an onboard workout. To

22HOW TO USE AN IFIT WORKOUTNote: To use an iFit workout, you must have an optional iFit module. To purchase an iFit module at any time, go to www.iFi

23HOW TO USE THE SOUND SYSTEMTo play music or audio books through the console sound system while you exercise, plug a 3.5 mm male to 3.5 mm male audio

24 MODULE—If an iFit module is connected, the display will show the word WIFI. If a USB module is connected, the display will show the word USB/SD.

25 HOW TO FOLD THE TREADMILLTo avoid damaging the treadmill, adjust the incline to zero before you fold the treadmill. Then, remove the key and unplug

26MAINTENANCERegularly clean the treadmill and keep the walking belt clean and dry. First, press the power switch into the off position and unplug the

27 Next, locate the Reed Switch (52) and the Magnet (50) on the left side of the Pulley (49). Turn the Pulley until the Magnet is aligned with the Re

28SYMPTOM: The walking belt is not centered between the foot railsIMPORTANT: If the walking belt rubs against the foot rails, the walking belt may bec

29EXERCISE GUIDELINESThese guidelines will help you to plan your exercise program. For detailed exercise information, obtain a reputable book or consu

31. It is the responsibility of the owner to ensure that all users of this treadmill are adequately informed of all warnings and precautions.2. Befo

30 Key No. Qty. Description Key No. Qty. DescriptionPART LISTModel No. PETL10714.0 R0114A 1 8 #8 x 1/2" Screw 2 4 1/4" x 1/2&qu

31 Key No. Qty. Description Key No. Qty. Description 95 1 5/16" x 2 1/4" Shoulder Bolt 96 1 Storage Latch 97 1 Latch Crossba

325460552315154223104956343059235214512145486130345923434421535346191946373430593430593714571440404714143737373750101466393514663935146639351420107310

33687565727867673329693370167133337132444686868684444444447641EXPLODED DRAWING BModel No. PETL10714.0 R0114A

34171733778133852222108291738838926841128908487389113747137481792622112883144441239931299EXPLODED DRAWING CModel No. PETL10714.0 R0114A

3525368018869292425275810641444441111111882659264444449 EXPLODED DRAWING DModel No. PETL10714.0 R0114A

Part No. 356337 R0114A Printed in China © 2014 ICON IP, Inc.This electronic product must not be disposed of in municipal waste. To preserve the envi

421. Do not attempt to move the treadmill until it is properly assembled. (See ASSEMBLY on page 7 and HOW TO FOLD AND MOVE THE TREADMILL on page 25.)

5Thank you for selecting the new PROFORM® PERFORMANCE 1050 treadmill. The PERFORMANCE 1050 treadmill provides an impres-sive selection of features de

6PART IDENTIFICATION CHARTUse the drawings below to identify small parts used for assembly. The number in parentheses below each draw-ing is the key n

7• Assembly requires two persons.• Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until

82. Make sure that the power cord is unplugged. Press a Base Cap (74) into each side of the Base (85). Identify the Right Upright (90). Have a se

94. Hold the Right Upright (90) against the Base (85). Be careful not to pinch the wires. Partially tighten three 3/8" x 4" Screws (7) wit