17
H
OW TO USE A PRESET WORKOUT
1. Turn on the console.
S
ee step 1 on page 14.
2. Select a preset workout.
T
o select a preset workout, press the Workouts
button repeatedly until the name of the desired
workout appears in the display.
When you select a preset workout, the name of
the workout will appear in the display and a profile
of the resistance levels of the workout will scroll
across the matrix.
3. Begin pedaling to start the workout.
Each workout is divided into 20, 30, or 45 one-
minute segments. One resistance level and one
target pace setting are programmed for each seg-
ment. Note: The same resistance level and/or target
pace setting may be programmed for two or more
consecutive segments.
During the workout, the workout profile will show
your progress (see the drawing above). The flash-
ing segment of the profile represents the current
segment of the workout. The height of the flashing
segment indicates the resistance level for the cur-
rent segment. At the end of each segment of the
workout, a series of tones will sound and the next
segment of the profile will begin to flash. If a differ-
ent resistance level is programmed for the next
segment, the resistance level will flash in the dis-
play for a few seconds to alert you. The resistance
of the pedals will then change.
You will also be prompted to keep your pedaling
pace near the target pace setting for the current
segment. When the TOO SLOW indicator is lit,
increase your pace. When TOO FAST indicator is
l
it, decrease your pace. When the center indicator
is lit, maintain your current pace. IMPORTANT:
The target pace settings are intended only to
provide motivation. Make sure to pedal at a
p
ace that is comfortable for you.
If the resistance level for the current segment is
too high or too low, you can manually override the
setting by pressing the decrease and increase but-
tons. However, when the current segment ends,
the pedals will automatically adjust to the resis-
tance level for the next segment.
If you stop pedaling for several seconds, a series
of tones will sound and the workout will pause. To
restart the workout, simply resume pedaling. The
workout will continue until the last segment of the
profile flashes and the last segment of the workout
ends.
When the workout is completed, the words PRO-
GRAM DONE will appear in the display for a few
seconds. Note: If you continue to pedal after the
workout is completed, the display will continue to
show exercise feedback; however, the display will
not show the elapsed time until you select the
manual mode or a new workout.
4. Follow your progress with the display.
See step 4 on page 14.
5. Measure your heart rate if desired.
See step 5 on page 15.
6. Turn on the fan if desired.
See step 6 on page 15.
7. When you are finished exercising, the console
will turn off automatically.
See step 7 on page 15.
Profile
(24 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals