ProForm 315 Ic Bike User Manual download pdf (Page 5)

1. Remove the two screws, the two washers, and

the shipping bracket (not shown) from the rear of

the Frame (1) if necessary. Discard the screws,

washers, and shipping bracket.

Identify the Rear Stabilizer (7), which does not

have wheels.

Tighten two Leveling Feet (16) and two M10

Hex Nuts (49) into the underside of the Rear

Stabilizer (7).

Attach the Rear Stabilizer (7) to the Frame (1)

with two M8 x 16mm Screws (25) and two M8

Washers (24).

2. Remove the two screws, the two washers, and

the shipping bracket (not shown) from the front

of the Frame (1). Discard the screws, washers,

and shipping bracket.

Orient the Front Stabilizer (8) so that the Wheels

(21) are in the position shown.

Attach the Front Stabilizer (8) to the Frame (1)

with two M8 x 16mm Screws (25) and two M8

Washers (24).

• Assembly requires two persons.

• Place all parts in a cleared area and remove the

packing materials. Do not dispose of the packing

materials until you complete all assembly steps.

• Assembly may be easier if you have your own set

of wrenches. To avoid damaging parts, do not use

power tools.

• In addition to the included tool(s), assembly

requires the following tools:

one Phillips screwdriver

one adjustable wrench

ASSEMBLY

1 2 3 4 5 6 7 8 9 10 ... 23 24

No comments

ProForm 315 Ic Bike User Manual Page 5