ProForm 600E User Manual download pdf (Page 7)

2. See the inset drawing. Cut the plastic tie near

the Upright Wire (88).

Attach a Wheel (93) to the Base (91) with a 3/8"

x 2" Bolt (9) and a 3/8" Nut (10). Do not over-

tighten the Nut; the Wheel must turn freely.

Press a Base Cap (110) into the Base (91).

110

. Make sure that the power cord is unplugged.

ith the help of a second person, carefully tip

the treadmill onto its left side. Partially fold the

Frame (53) so that the treadmill is more stable;

do not fully fold the Frame yet.

Cut the shipping tie securing the Upright Wire

(88) to the Base (91). Locate a plastic tie in the

indicated hole in the Base, and use the tie to pull

the Upright Wire out of the hole.

Attach two Base Feet (89) to the Base (91) in the

locations shown with two #8 x 1" Tek Screws (6)

and two Base Foot Spacers (92).

Then, attach the other two Base Feet (89) with

two #8 x 1" Tek Screws (6).

ole

Plastic Tie

Cut

1 2 3 4 5 6 7 8 9 10 11 12 ... 35 36

No comments

ProForm 600E User Manual Page 7